The dimensional tolerance of the operation is about.
2.
Welded pipe often have tighter dimensional tolerances than the seamless type, and can be cheaper to manufacture.
3.
SAAMI recommended chamber dimensional tolerance range does allow for the headspacing to take place on the shoulder if need be.
4.
Simple shapes with loose dimensional tolerances ( + /-1 / 16 " ) can use plywood or metal forms.
5.
Very tight weight and dimensional tolerances can be obtained on wheel equipment, as the parison is captured on both ends.
6.
Common examples of inspection by measurement or dimensional tolerance specified in a drawing for that part, and is thus acceptable for use.
7.
The process can also be highly automated, provides strict control over dimensional tolerances and does not interfere with the biocompatibility of parts.
8.
In other words, if a process can manufacture parts to a narrow dimensional tolerance, the parts will not be very rough.
9.
Therefore, it is most economical to plan the largest sheet size possible consistent with the size and dimensional tolerances of the part.
10.
This process is good for large production runs at economical cost, but produces geometric shapes with less strength than other moulding processes and has poor dimensional tolerance.
How to say dimensional tolerance in Hindi and what is the meaning of dimensional tolerance in Hindi? dimensional tolerance Hindi meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.
Mobile